Standard Configuration:
1 * eVic VTC Dual Battery
1 * Dual Back Cover (for 1 cell)
1 * USB Cable
1 * User Manual
1 * Warranty Card
1 * Warning Card
1 * eVic VTC Dual Battery
1 * Dual Back Cover (for 1 cell)
1 * USB Cable
1 * User Manual
1 * Warranty Card
1 * Warning Card
Specification:
Size: 23.00*38.00*86.00mm (with one cell)
23.00*55.50*86.00mm (with two cells)
Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Modes
Output Wattage: 1-75W(one cell) /150W(two cells)
Resistance Range: 0.05-1.5ohm for VT/TCR mode
0.1-3.5ohm for VW/BYPASS mode
Temperature Range: 100-315°C/ 200-600°F
Size: 23.00*38.00*86.00mm (with one cell)
23.00*55.50*86.00mm (with two cells)
Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Modes
Output Wattage: 1-75W(one cell) /150W(two cells)
Resistance Range: 0.05-1.5ohm for VT/TCR mode
0.1-3.5ohm for VW/BYPASS mode
Temperature Range: 100-315°C/ 200-600°F
Replaceable Battery Cover For Alternatively One Or Two Cells
eVic VTC Dual comes with the replaceable battery cover, with which you can use one or two cells as you prefer.
Simply hold the battery cover and slide to take it off. Put the battery into the cover and push it back into the body.
Simply hold the battery cover and slide to take it off. Put the battery into the cover and push it back into the body.
Onboard Reverse Polarity Protection
With the Onboard Reverse Polarity Protection,
it will protect the device from damage in the event of reverse battery installation.
We kindly recommend high-rate 18650 cells with rated discharge current
25A.
it will protect the device from damage in the event of reverse battery installation.
We kindly recommend high-rate 18650 cells with rated discharge current
25A.
RTC (Real Time Clock) Display
Dual Circuit Protection
eVic VTC Dual applies two sets of battery protection circuit system, realizing overall battery protection of over-charging,
over-current and over-discharging, which makes it more safe and reliable.
over-current and over-discharging, which makes it more safe and reliable.
Upgradeable Firmware
eVic VTC Dual comes with the upgradeable firmware.
Having the latest Version 4.02, new interface, multiple modes and functions are available.
Having the latest Version 4.02, new interface, multiple modes and functions are available.
Applied with exquisite 510 Thread
Stainless thread with spring connector
Charging & Upgrading
Simply connect the eVic VTC Dual with the micro USB cable to charge or upgrade.
When it is fully charged, the charging bar will disappear.
When it is fully charged, the charging bar will disappear.
